[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
RE: Banjo bolt thread pitch
- Subject: RE: Banjo bolt thread pitch
- From: "Danilowicz, Paul S." <danilps@xxxxxxxx>
- Date: Tue, 24 Aug 1999 07:45:50 -0400
You can get a handy thread pitch guage at most any hardware or tool store. I use mine more often than you would expect. Probably less than $5 US.
> Paul
> Externals & Controls Module Center;
> Fuel Systems Business Center, Value Engineering
> Phone (860) 565-7575 FAX: (860) 565-2914
> E-Mail: danilps@xxxxxxxx
> Location: OBF-4 , Row 7-S
>
>
> ----------
> From: Stephen E. Hale[SMTP:seh750@xxxxxxxxxxxxx]
> Sent: Monday, August 23, 1999 8:46 PM
> To: ST@xxxxxxxxxxxxxx
> Subject: Banjo bolt thread pitch
>
> Does anyone happen to know the thread pitch of the banjo bolts on the ST?
> I presume they are 10mm, but is it 1.0 or 1.25 thread pitch?
>
> Please email me direct if you happen to know the answer, it takes awhile to
> get the list digest.
>
> Thanks!
>
>
>
> -Stephen
>
> seh750@xxxxxxxxxxxxx
> http://www.netcom.com/~seh750/home.htm
>
>
> * * * * * * * * * * * * * * * * * * *
> The ST Mailing list is sponsored by the Unofficial ST Website
> http://www.TriumphNet.com/st for ST and Mailing List info
>
* * * * * * * * * * * * * * * * * * *
The ST Mailing list is sponsored by the Unofficial ST Website
http://www.TriumphNet.com/st for ST and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=