[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
RE: Clutch Cable hanger
- Subject: RE: Clutch Cable hanger
- From: Troy Blood <TroyB@xxxxxxxxxxx>
- Date: Tue, 22 Jun 1999 13:02:21 -0400
Charles,
I put the bolt for the radiator mount through that u shaped bend with
the straight part of the hanger that leads to the 90 degree bend part in
front of the radiator bracket. I am recalling from memory,I will go out
and take a look if necessary. How do they have the hanger mounted to the
radiator mount?
Thanks,
Troy Blood
PH (864) 963-3471
FaX (864) 967-2787
mailto:troyb@xxxxxxxxxxx
- -----Original Message-----
From: Charles Lewis [mailto:shizzard@xxxxxxxxxxxxx]
Sent: Tuesday, June 22, 1999 1:03 PM
To: ST@xxxxxxxxxxxxxx
Subject: Re: Clutch Cable hanger
It sounds like you have it on right, however, in looking at mine I see
that it also has a wiring harness routed through it, appearing to hold
the wire up off the radiator. The wires rest in a U shaped bend and the
cable is running through the top loupe.
Charles
Troy Blood wrote:
> I positioned it so
> that the loop is closest to the steering head assy. Part of the
hanger
> about a half inch long and bent 90 degrees is pointed towards the
> faring. Is this correct?
>
> Troy Blood
> PH (864) 963-3471
> FaX (864) 967-2787
> mailto:troyb@xxxxxxxxxxx
>
> * * * * * * * * * * * * * * * * * *
*
> The ST Mailing list is sponsored by the Unofficial ST Website
> http://www.TriumphNet.com/st for ST and Mailing List info
* * * * * * * * * * * * * * * * * *
*
The ST Mailing list is sponsored by the Unofficial ST Website
http://www.TriumphNet.com/st for ST and Mailing List info
* * * * * * * * * * * * * * * * * * *
The ST Mailing list is sponsored by the Unofficial ST Website
http://www.TriumphNet.com/st for ST and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=