[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
RE: Speedo measurements
- Subject: RE: Speedo measurements
- From: "Retherford, Martin" <MRetherford@xxxxxxxxxxx>
- Date: Mon, 22 Mar 1999 11:19:39 -0800
Eric,
How would we go about getting something like this corrected?
Is it a factory issue, possibly warranty?
Martin
The speedo however was a different story - the following
represents the ST
indicated speed, the actual speed (from the Sigma) and the
RPM's shown on
the ST tach. I'm sorry there's not more data, but I had to
stop after each
measurement - take off my gloves - open my jacket - take out
pen and paper
- record the 3 values and then start again - you get the
picture - I could
only take it so long before just wanting to keep riding -
however if anyone
has a specific value they want tested, let me know and I'll
do it in the
next few days.
MPH MPH
Indicated Actual RPM
109-110 100 6400-6450
100 92 6000
90 83 5200
80 73-74 4600-4700
I also tested RPM's vs actual speeds
RPM Actual MPH
5000 78
4500 71
4000 63
3500 56
The RPM's on the first set of numbers are my best
approximations of where
the needle was - at 100 mph its tough to see if it's 6400 or
6350 or 6450 -
I could just tell that it was under 6500 by a small amount
but greater than
6250......
- Eric
* * * * * * * * * * * * * * *
* * * *
The ST Mailing list is sponsored by the Unofficial ST
Website
http://www.TriumphNet.com/st for ST and Mailing List info
* * * * * * * * * * * * * * * * * * *
The ST Mailing list is sponsored by the Unofficial ST Website
http://www.TriumphNet.com/st for ST and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=