[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: Conventional oil
- Subject: Re: Conventional oil
- From: stump <stump@xxxxxxxxxxxx>
- Date: Tue, 04 May 1999 21:23:07 -0700
Bob, heres some info on the oil filter issue or rather some of the known
filters that will work. Regards, Steve
>
> At 11:58 AM 05/04/1999 -0600, Harl wrote:
> >Also, my parts guy was out of Triumph filters and wanted to sell me a filter
> >for
> >a CBR600, saying it was the same? Anyone else out there experienced that?
>
> >From the T5 list:
> >Sashay down to your local Honda dealer and ask for an "mm-9" oil filter.
> >They'll know 'zackly what you're talking about. Known bikes that use this
> >are the VFR 750, Goldwing, CBR600, Blackbird XX. The full part number
> >is: 1 5410 mm9-013. If you've been using Triumph filters and the Triumph
> >filter wrench, beware that you'll need a new filter wrench as they're about
> >1mm or so different in size. Just enough where the wrenches won't work
> >on each others filters.
>
> Hope that helps
>
> - Eric
>
> * * * * * * * * * * * * * * * * * * *
> The ST Mailing list is sponsored by the Unofficial ST Website
> http://www.TriumphNet.com/st for ST and Mailing List info
* * * * * * * * * * * * * * * * * * *
The ST Mailing list is sponsored by the Unofficial ST Website
http://www.TriumphNet.com/st for ST and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=