[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: Power down
- Subject: Re: Power down
- From: Eric Sheley <eric@xxxxxxxxxx>
- Date: Tue, 25 Jan 2000 06:10:47 -0500
At 08:30 AM 01/25/2000 +0000, Ross Clifford wrote:
>The correct procedure is to use the ignition switch, the reason for this is
>that there is a relay set in the ECM circuit when you turn off the ignition
>the relay powers the ECM for a few seconds and takes readings for the
>sensors around the engine such as throttle position, the air bypass setting,
>crank position etc. This information or reference point is used by the ECM
>when you next start your engine. Hence the reason the manual tells you not
Thanks Ross - I guess I'll be re-learning my power down sequence.
As always thanks for your participation in the list.
- - Eric
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=