[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Fork Oil Changes
- Subject: Re: [ST] Fork Oil Changes
- From: al bailey <acb@xxxxxxx>
- Date: Thu, 12 Jul 2001 13:46:12 -0700
"Rich Hartwick (by way of Message_Redirector@xxxxxxxxxxxxxx)" wrote:
>
> I agree it is not necessary to pull the forks to change the oil, but at
> least periodically, it is good to do, and the job is much easier than it
> appears. If there is any seal leakage, they will have to get pulled and
> rebuilt. For normal oil changes (for which there is no schedule)
> though, I have found the following procedure works well.
rick - great post - thanks a lot!
i'll probably give this a try the next time
i'm doing a motor oil change, rather than
dropping the wheel.
and if i may, a question: have you replaced
your fork springs?
thanks - al.
- --
/\ _
/ \ \ al bailey
/ /_ \ \ _ 415.448.crud
/_/ \_\___\ acb@xxxxxxx
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=