[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] brake pad question
- Subject: Re: [ST] brake pad question
- From: Erik Miner <Axeis@xxxxxxxxxxxxxx>
- Date: Wed, 7 Mar 2001 21:27:20 -0500
Steven the minimums are when the groves in the pads are gone. The
front pads are about 4mm thick when new the rear is about 5mm. My
fronts have a bit more than 3mm remaining with 11K on them. The rears
wore out with 11K and I REALLY don't use the rears much.. different
compound I believe.
Erik
>I need someone who has their shop manual handy to answer a question. I need
>the minimum thickness for front and back brake pads. I would also like to
>know if anyone knows the new stock pads thickness. I'll be bucking up for a
>torques bit to take the front calipers off to check the pads properly and
>would like some of this info ahead of time.
>
>Steven "Dirty Dawg" Kohlscheen
>
>
> * * * * * * * * * * * * * * * * * * *
> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> http://www.TriumphNet.com/st/lilley for more info
> http://www.TriumphNet.com/st for ST, RS and Mailing List info
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=