Re: [ST] GenMar risers on RS

["Keith Winter" <kwinter@xxxxxxxxxxxxx>]

On 12 Mar 2001, at 12:30, Paul Fox wrote:

> the thing that hits is the loopy part of the throttle cable housing,
> the J-shaped part.
> 
> when i installed the gen-mars, i just rotated the whole throttle housing
> forward by 90 degrees, and that kept it from hitting.  you can't do
> this if you have the triumph heated grips, though, because the clipons
> have slots in them for the wiring, and after you rotate the throttle
> housing, the wires won't line up with the slot.

I thought that was going to be the case; unfortunately, I do have the heated 
grips, so it looks like I will not be able to install them.  :-(

Thanks for the info; I guess I just saved $90.

- -Keith



     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

End of st-digest V2001 #147
***************************


 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

                      End of Triumph ST/RS Digest
            ST/RS Digest is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

          This digest Copyright 1999-2001 TriumphNet.com