Re: [ST] RaceTec

[Richard & Lisa White <RedRiders@xxxxxxx>]

Dave,
 
> I recently paid for RT springs and emulators to be installed in my '99 Sprint
> ST.  The forks were sent to the RT factory to have the job done. On
> inspection, the only thing that looks different is the presence of RT
> stickers on the lower tubes. The only adjustment is the preload screw on top,
> which was there before. Where should I look for the damping adjustment on the
> emulators? The reason I ask is that I have seen advice on the list a couple
> of times to "try backing off the emulators two turns" etc. 

We had the RT done at the dealer and the preload screw is the same.  The
screw, however, is not turned in nearly as far as what it was prior to
having the mod done. . . .  

Put the forks back on the bike and have a go at it!

Lisa

     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=