Re: [ST] Re: carb synch tool?

[Lex Offer <reffoxel@xxxxxxxxxxx>]

Nick,

This sounds like something that would be perfect for the FAQ on Triumphnet.com.

At 02:26 PM 10/25/01 -0500, you wrote:
>Brian,
>You will probably need to order the carb sync tool since they are not
>usually stocked in local stores.  Expect to pay about $30-$40.  Mine was
>$39 from Dennis Kirk (#28-273).  You will also need adapters to connect the
>vinyl tubing from the tool to the nipples on the throttle bodies.  Go to
>your local outo parts store and pick up 6" of .25" ID rubber tubing (I had
>some lying around).  Cut this into 3 pieces that are 2" long.  One end of
>the rubber tubing will fit over the t'body nipple, and the other end will
>fit over the end of the vinyl tubing.
>
>The cost of all of the equipment (appr. $40) is less than the cost of
>letting the dealer do it for you once.  Also, I didn't want to wait until
>the 12k service to have it done with the valves.  Mine were already out of
>sync by quite a bit at only 7800 miles.  If you need any more help, just
>give me a shout, and I can walk you through the process.
>
>Nick
>'00 yellow RS

Lex "Digital Dawg" Offer
reffoxel@xxxxxxxxxxx
2000 Lucifer Orange Sprint ST
1986 VF1000 F-2 Bol d'Or

     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

End of st-digest V2001 #650
***************************


 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

                      End of Triumph ST/RS Digest
            ST/RS Digest is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

          This digest Copyright 1999-2001 TriumphNet.com