Re: [ST] Sprint RS rear wheel removal

[David Edmondson <david_edmondson@xxxxxxx>]

On Saturday, September 8, 2001, at 08:24  pm, Jan and Don Draper wrote:

 > Sprint RS rear wheel removal
 > Basically, you just reverse the steps above.   *If* you paid attention
 > to
 > how things go together while you were taking them apart, then the only
 > tricky part is getting the chain tension right.  This, unfortunately,
 > involves
 > quite a bit of trial and error and is a big reason for wanting the
 > swivelled
 > 1/2" drive so you don't wind up trying to do everything with the big
 > torque
 > wrench.
 >

Before removing the wheel run a pencil down the back edge of the
adjuster plate on each side to mark the swinging arm, it will help
getting it roughly aligned.

Dave


     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=