[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
RE: [ST] Steel Brake Lines
- Subject: RE: [ST] Steel Brake Lines
- From: "Ken Mitchell" <kp.mitchell@xxxxxxxxxxx>
- Date: Sat, 6 Apr 2002 20:24:09 -0500
Using a magnet will only work if the stainless steel that *might be* in the
lines is a 400 series stainless. More than likely, a s/s line is made from
non-magnetic 300 series s/s.
- -----Original Message-----
From: Matt Knowles
Using a magnet might be less intrusive to the patient.
>Hard to tell without actually taking a blade to the "sheathing" and strip
>off a piece to see if there's steel underneath. I'm not about to do that
>though.
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=