[ST] Re: st-digest V2002 #220

[TrmpetDave@xxxxxxx]

In a message dated 4/17/02 10:00:05 PM, owner-st-digest@xxxxxxxxxx writes:

<< I think a flat bar type approach will work, a piece of flat aluminium with
a couple of holes drilled to the spacing of those that hold the Triumph
luggage "rack" part to the "mount" part (bolts are accessible under
covers, will need longer ones) and that extends out to the side enough to
clear the top box (Givi E360 for now, mebbe Triumh's later).  At the other
end of the mount need a hole to fit a PL connector.
 >>

Yes I did something like this-I have the Triumph rear luggage rack that the 
Triumph top box attaches to, and passed the flat aluminum bar under the rear 
edge of the rack, drilling holes in it to match the 2 slots at either side of 
the rack-the bolts have to be angled a bit-don't tighten them too much or you 
will fracture the aluminum that forms the slot DAMHIKT (Don't Ask Me How I 
Know This) Use aircraft-type self locking nuts instead. Easy to take off the 
bike when you are not on a trip. Dave Collins, San Diego

     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=