Re: [ST] Socket polarity

["Charlie McCullough" <charliem90@xxxxxxxxxxxx>]

So I'm getting conflicting reports on this.

Anyone got a real schematic to see what was actually designed????

I'm beginning to suspect that I have a faulty wiring harness with the
+12/Gnd swapped on the accessory socket. There seems to be more folks with
+12 in the middle (4 confirmed) versus +12 on the ring (2 confirmed).

Anyone got a technical contact at TA? Would like to hear an official "how
it's supposed to be" - though I gotta figure it _ought_ to be gnd on the
ring (on a hot swap you always want ground contacting before enabling
+/-VDC).

Charlie McCullough
tz250 WERA#90
Duc 748
Triumph ST

- -----Original Message-----
From: BParker647@xxxxxxx <BParker647@xxxxxxx>
To: st@xxxxxxxxxxxxxx <st@xxxxxxxxxxxxxx>
Date: Tuesday, July 02, 2002 7:03 PM
Subject: [ST] Socket polarity


>I just stuck my shiny Radio Shack meter down the hole. Red probe in te
>middle, +12V. Black probe in the middle, -12V. voltage between the side and
>frame ground, 0V.
>
>My 2001 has +12V in the center of the accessory socket.
>
>bp
>
>     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
*
>      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
>          http://www.TriumphNet.com/st/lilley for more info
>   http://www.TriumphNet.com/st for ST, RS and Mailing List info
>


     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=