Re: [ST] Vandalised ignition lock

[Brian D <brd@xxxxxxx>]

On Wed, Jul 03, 2002 at 12:05:52AM +0100, ksmith955 wrote:
> 
> OK, enough griselling from me - question is:  is it possible to replace the
> barrel alone, or do you have to replace the whole switch, which involves
> removing top yoke and drilling out the blind bolts.? Any hints would be

Don't know if it's one piece or not.  I had mine out once and couldn't
even see how to get the wiring disconnected from the switch.  

But I can tell you that to get the switch out, you remove the clip-ons
and the triple clamp.  There are 2 bolts on the bottom holding it in
place.  You don't have to drill them out, they are 4mm.  Be careful not
to strip them.

Laters,
Brian
- -- 
'99 ST (black)
Dallas, TX

     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=