Re: [ST] Another plug for Skyking Products.

[Brian D <brd@xxxxxxx>]

On Wed, Jul 10, 2002 at 01:07:44PM -0700, Mike Patzius wrote:
> As some of you know I have been suppling the RS that has been the test 
> platform for the Sprint ST/RS Frame Sliders, Fender Eliminator/Indicator 
> Bracket and now the latest is Bar Risers.  John had an idea to create some 
> bar risers that would be better than the ones made by Gen-mar, and I think 
> he has done it.  

Cool!

> I received the risers over the July 4 weekend and installed 
> them with no problems.  You remove the 2 screws that hold the bars down and 
> loosen the pinch clamp bolt and remove the bar.  Slide the Riser over the 
> fork tube, reverse the procedure above and there you have it.  

I'm not familiar with the RS clip-ons, so don't know if they're the same
as the ST.  But I'm trying to visualize the set up.  So do the bars grip
the top of the fork tube anymore?  Or does tightening the pinch-bolts
actually do anything, or are the clip-ons just held on by the 2 bolts
into the triple clamp now?

Do you replace the screws with longer ones that go through the clip-on,
riser, and into the original holes in the triple clamp?

Most importantly, will they work on the ST?    :)

Laters,
Brian
- -- 
'99 ST (black)
Dallas, TX

     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=