[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

Re: [ST] Help request with torque specs (US)



At 10:32 PM 6/6/02 -0700, you wrote:
>..front brake calipers
   caliper bolts 40nm - 29.5024 lbf-ft  
   pad retaining pin 20nm - 14.7512lbf-ft
   banjo bolt 25nm - 18.439 lbf-ft
>..rear brake caliper
   caliper bolts 40nm - 29.5024 lbf-ft  
   pad retaining pin 20nm - 14.7512lbf-ft
   banjo bolt 25nm - 18.439 lbf-ft
>..Rear sprocket
   each of the little nuts 33nm - 24.3395  these are the ones that attach the sprocket    to the cushdrive
   the stake nut or retaining nut(the really big one)146nm - 107.684 lbf-ft
>..Front sprocket aka output sprocket
   132nm - 97.3581 lbf-ft
>..that bolt near the rear hub for chain adjustment
    I believe what you are referring to is the pinch bolt  - 55nm - 40.5659 lbf-ft
Hope that helps.  I believe I found the right numbers, the manual is written in British so finding specific parts when referred to in American terms can be tricky.

>Tony Burke
>00 ST (RED)

Lex "Digital Dawg" Offer
reffoxel@xxxxxxxxxxx
2000 Lucifer Orange Sprint ST (no that's not a typo)
1986 VF1000 F-2 Bol d'Or

     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

End of st-digest V2002 #326
***************************


 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

                      End of Triumph ST/RS Digest
            ST/RS Digest is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

          This digest Copyright 1999-2002 TriumphNet.com