Re: [ST] stupid mistake; oil pan needed!!

["Al Garvin" <agarvin@xxxxxxxxxxxxx>]

Chris,
    I repaired a hole punched into my gas tank from running over some re-bar
on the freeway with a small steel patch and JB Weld. After a year it is
still holding and does not seem
to be affected by gas. Should work on an oil pan. And the cost was about
$4.95.
Al
- ----- Original Message -----
From: "Kevin T. McDonald" <ktmaustin@xxxxxxxxxxxxx>
To: <ST@xxxxxxxxxxxxxx>
Sent: Saturday, November 02, 2002 9:36 PM
Subject: RE: [ST] stupid mistake; oil pan needed!!


> Chris,
> If the used part doesn't materialize:
> Ask around for the best 'TIG' welder in your area.
> They can work magic on projects like this...
> km
>
> -----Original Message-----
> From: owner-st@xxxxxxxxxx [mailto:owner-st@xxxxxxxxxx] On Behalf Of
> Chris
> I took the
> filter off and there is a nice hole in the oil pan.
> Dealer says I can get a new one for $304.
> Chris STrizver
>
>
>
>
>
>      *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
*
>       The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
>           http://www.TriumphNet.com/st/lilley for more info
>    http://www.TriumphNet.com/st for ST, RS and Mailing List info


     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=