[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Spray of Gasoline
- Subject: Re: [ST] Spray of Gasoline
- From: Evan Markwood <markwood2k@xxxxxxxxxxx>
- Date: Tue, 15 Oct 2002 14:34:36 -0400
Thanks Brad,
Any listers tried the metal ones?
Evan
- ----- Original Message -----
From: "Brad Turner" <bturner@xxxxxxxxxxx>
To: <ST@xxxxxxxxxxxxxx>
Sent: Tuesday, October 15, 2002 1:59 PM
Subject: RE: [ST] Spray of Gasoline
> Regarding plastic quick disconnects, there are a variety of different
> versions available from US Plastics Corp.
>
>
http://www.usplastic.com/catalog/category.asp?catalog%5Fname=USPlastic&categ
> ory%5Fname=Quick+Disconnect+Couplings+and+Inserts&Page=1
>
> For gasoline applications you want to get the acetal ones not the
> polyethylene ones. I've used the barb end ones on my race bikes without
any
> problems for years. They are rated to 120psi. Pay attention when ordering
as
> they sell connectors with and without a shutoff valve. The cost is on the
> order of $4-7 depending on the style.
>
> regards,
> -brad-
>
> -----Original Message-----
> From: Evan Markwood [mailto:markwood2k@xxxxxxxxxxx]
> Sent: Tuesday, October 15, 2002 8:52 AM
> To: ST@xxxxxxxxxxxxxx
> Subject: Re: [ST] Spray of Gasoline
>
>
> Kevin,
>
> Did you ever get these fittings? did they work? Are there part numbers
or
> some sizing info you can offer?
>
> Much Thanks
>
> Evan
> ----- Original Message -----
> From: "Kevin T. McDonald" <ktmaustin@xxxxxxxxxxxxx>
> To: <ST@xxxxxxxxxxxxxx>
> Sent: Monday, September 30, 2002 9:48 AM
> Subject: RE: [ST] Spray of Gasoline
>
>
> > Call Brad at EZ Flow to order the metal quick disconnects.
> > http://www.e-z-flow.com/
> > km
> >
> > -----Original Message-----
> > From: owner-st@xxxxxxxxxx [mailto:owner-st@xxxxxxxxxx] On Behalf Of Bil
> > Swartz
> > Sent: Monday, September 30, 2002 8:04 AM
> > To: ST Digest
> > Subject: Re: [ST] Spray of Gasoline
> >
> > On Mon, 30 Sep 2002, Denis Liakos wrote:
> >
> > > no change in either fitting. I'd like to know if you have any success
> > > finding a metal version, as I'd like to carry one in the tankbag....
> >
> > I second that want for metal fittings, but I think I'd go ahead and
> > replace mine if I knew what to use.
> >
> > If someone knows a source and partno's for either replacement plastic or
> > metal fittings I'd sure like to know 'em!
> >
> > aTdHvAaNnKcSe,
> > --
> >
> > ._O_. '99 SprintST -mine
> > -Bil- /_\o/_\ '98 VFR800FI -hers /~\
> > "No I don't want a pickle..." /H\ '89 Hawk GT -ours ASCII \ /
> > Against
> > bil@xxxxxxxxxx (=O=) AMA, CMH-Moto, Ribbon X
> > HTML
> > "Drink Real Ale" "Quch!" #3 U DoD(6.66), HSTA! Campaign / \
> > Mail
> >
> >
> > * * * * * * * * * * * * * * * * *
> > * *
> > The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> > http://www.TriumphNet.com/st/lilley for more info
> > http://www.TriumphNet.com/st for ST, RS and Mailing List info
> >
> >
> > * * * * * * * * * * * * * * * * *
*
> *
> > The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> > http://www.TriumphNet.com/st/lilley for more info
> > http://www.TriumphNet.com/st for ST, RS and Mailing List info
>
>
> * * * * * * * * * * * * * * * * * *
> *
> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> http://www.TriumphNet.com/st/lilley for more info
> http://www.TriumphNet.com/st for ST, RS and Mailing List info
>
> * * * * * * * * * * * * * * * * * *
*
> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> http://www.TriumphNet.com/st/lilley for more info
> http://www.TriumphNet.com/st for ST, RS and Mailing List info
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=