[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Helmet cam
- Subject: Re: [ST] Helmet cam
- From: "Anderson, Neil G (China)" <andersng@xxxxxx>
- Date: Mon, 28 Apr 2003 18:44:55 +0800
Mike Bostock wrote:
>I have found another DC-DC voltage regulator which supposedly
>regulates at 12V although when tested I was getting 12.5V from the
>regulator but 12.9V was going in. I may try the solution with a 12V
>Zener diode in series.
Sorry if you know this already but...the Zener diode would need to go in
parallel with the camera, i.e. from camera +12 V input to ground. You'd
need a resistor between the output of the regulator and the camera/Zener
diode +12 V input. The Zener and resistor can get rather warm, so it's best
to check the power calculations.
Neil
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=