[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Replacing Brake Pads
- Subject: Re: [ST] Replacing Brake Pads
- From: "Rick & Joyce" <rnjwes@xxxxxxxxxxx>
- Date: Tue, 26 Aug 2003 19:53:56 -0700
> 6. What's the minimum thickness for the front and rear rotors?
It's stamped on the rotors:
Front 3.5mm
Rear 5.0mm
And 1.5mm (about the thickness of a US Quarter) is mininum pad
friction material thickness. If you can still see slots in the
OE pads you're OK.
- --
HTH,
Rick in Oregon
'01 Sprint ST
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
End of st-digest V2002 #1189
****************************
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
End of Triumph ST/RS Digest
ST/RS Digest is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
This digest Copyright 1999-2002 TriumphNet.com