Re: [ST] Clutch Cable

["2000blueRS" <2000blueRS@xxxxxxxxxxx>]

Mine is routed through the opening in the right side motor mount, rearward
behind the frame rail, then down to the fitting. The metal tube points up
and runs just behind the bodywork bracket.

_________________
Mike the Web Geek
1994 Ducati 900SP, 2001 Triumph RS
Graphic Design, Editing, Web Design
Owner/operator of
www.minnesotasbookstore.com
www.comm.media.state.mn.us/bookstore/centralmail/ (under development)
www.comm.media.state.mn.us/

- ----- Original Message ----- 
From: "Dennis Griffin" <eagleeye@xxxxxxxxx>
To: <st@xxxxxxxxxxxxxx>
Sent: Sunday, July 13, 2003 3:55 PM
Subject: [ST] Clutch Cable


> My '00 RS has a clutch cable that has a metal sweep L (~ 45°) at the
> lower end where it attaches to the bracket. Would someone with this
> same configuration please describe the cable routing and orientation of
> that L bend, or maybe send me a picture? Mine seems to want to point
> down before the cable goes back up, so that it passes under the Triumph
> logo on the right side of the engine. Looks goofy. I tried routing it
> with the bend pointing up, but there is so much cable that way that I
> had to pass it outside the fork legs, and it didn't seem right that way
> either. Looks like later models may have a straight cable, which must
> be shorter.
>
> Thanks,
>
> Dennis
> Scottsdale, AZ
> '00 RS, miss me yellow
>
>      *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
*
>       The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
>           http://www.TriumphNet.com/st/lilley for more info
>    http://www.TriumphNet.com/st for ST, RS and Mailing List info


     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=