[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

RE: [ST] GenMar set screws



I am not talking about the allen screws on the top of the bar but on the
outside (very small ones). I don't see how the bar could move with these
getting loose. They're just here to hold in place the inner washer with the
cap on top of the fork preload ajusters
Jean
99 ST

Jack "Rude Dog" Hays wrote:
BTW, if you hear a pop when rolling the bike and applying the front brake
check these screws. I looked everywhere last year and finally noticed the
left bar was slightly moving and found that set screw lose. I tightened
with LocTite and the pop went away.

     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
*
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info


     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=