[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] fuelline extension/fittings
- Subject: Re: [ST] fuelline extension/fittings
- From: Bil Swartz <bil@xxxxxxxxxx>
- Date: Thu, 20 Mar 2003 14:36:01 -0500 (EST)
More info on this just in from Adam @ Jack Lilley:
- --
Hi There
These are the 2 items you asked about.
metal fuel hose connector kit JL500001 38.29 UK Pounds
T3880127 Hose extension kit 57.09 UK Pounds
We only do the dry lock male fittings in metal and not the female part in
the tank as these have proved more reliable and log lasting.
Regards
Adam
- --
In looking at a friend's 01 that's developed a leak, we see the lines are
marked with 2 different sizes: 9.5mm and 7mm
We think it's the connector on the 7mm line that has the problem. I
haven't seen any of the previous posts on fitting indicate that there are
going to be two different sizes in play, is this the case?
Just checking before calling E-Z-Flow to see if we need one each of the
3/8" and 1/4" ID elbows.
Also going to look into which Colder connectors are needed to make the
extension set as $90 for that seems a tad steep.
- --
._O_. '99 SprintST -mine
-Bil- /_\o/_\ '98 VFR800FI -hers /~\
"No I don't want a pickle..." /H\ '89 Hawk GT -ours ASCII \ / Against
bil@xxxxxxxxxx (=O=) AMA, CMH-Moto, Ribbon X HTML
"Drink Real Ale" "Quch!" #3 U DoD(6.66), HSTA! Campaign / \ Mail
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=