[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] front axle bolt size?
- Subject: Re: [ST] front axle bolt size?
- From: Dave <dbardell@xxxxxxxxxxxx>
- Date: Wed, 21 May 2003 13:50:54 -0400
The 01 uses a 19 mm Allen for the front axle. I used two 19 mm nuts
welded together, since I had no allen that large.
The 01 also uses 13 mm bolts for mounting the front calipers.
Torque for the front axle -- 45 ft lbs [ 61 Nm]
Torque for the front and rear caliper mounting bolts -- 29.5 ft lbs [
40 Nm]
Torque for the front axle clamp bolts -- 14.76 ft lbs [20 Nm]
My Haynes manual is for '97 thru '00 (source for the torque readings)
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=