[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

Re: [ST] Steering head wrench



The top nut is 30mm [~1-3/16"] and the adjuster nut below the
upper triple clamp is 38mm [1-1/2"].  The 38mm wrench will need
to be fairly thin, around 3-4mm.  Unlike the Trophy, our bikes
have only one 'adjuster' nut.  Both wrenches should be available
at tool outlets.
- --
Rick in Oregon
'01 Sprint ST



> I don't have the wrenches your looking for but a friend needed
the same for
> his Trophy and had the local dealer order it.  Well it turns
out that there
> are 2 wrenches needed at least that's what it sounded like.
They're sold
> as a set but each piece has it own part number.  Goofy but it's
Triumph.
>
> George
>
> At 03:45 PM 9/18/2003 , David W. Funk wrote:
> >Does anybody in the SF Bay Area have a wrench (or know where
to get one)
> >that will fit the Sprint ST Steering head nut? This is the one
under the
> >top triple
> >plate.
> >I want to adjust the steering head bearings.
> >
> >David W. Funk



     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=