Re: [ST] Race tech cartridge emulators

[Erik Miner <eeminer@xxxxxxxxxxx>]

Actually I had a local suspension guru finally dial it in and we ended up 
with 20wt . 15wt is a compromise.  20wt made it a bit too stiff when temps 
fell below 50, but otherwise it was nice.


At 10:17 PM 4/28/2004, you wrote:
>In a message dated 4/27/2004 3:38:56 PM Eastern Standard Time,
>eeminer@xxxxxxxxxxx writes:
>5 wt is way too light.. early on Racetech had a typo on their web site
>saying to use 5wt.. this was later corrected by Racetech after many found
>5wt too light. The weight of the oil controls rebound and trust me 5wt is
>too thin..15wt is a good compromise..FWIW stock is 10wt
>
>Erik
>I've found 15 weight slightly too light for my application, (210 lbs/1.0kg
>springs) I'm going to try 17.5 weight.
>Doug
>
>      *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   * 
> *   *
>       The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
>           http://www.TriumphNet.com/st/lilley for more info
>    http://www.TriumphNet.com/st for ST, RS and Mailing List info


     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=