[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

[ST] Adjusting shifter



Jack:
	Unscrew the nut that clamps the shifter to it's spline (shaft). Clean and mark the shaft 
and shifter with a "sharpie" pen. Remove the shifter arm from its spline and replace it on 
the spline one or two notches above the mark. Try the shifter with your new boots on. Keep 
moving it until the clearance is correct. Adjust the linkage as necessary to make up for 
any decreased/extra play. Tighten all fasteners and you're done.
Safe riding,
Howard Stephen Serlick
'03 Blue ST
Philadelphia
	

     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=