[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

[ST] Heated Grip Relay



My heated grips recently stopped working - not that I need them much in 
SC, but every once in awhile....

I don't have the installation instructions for the heated grip kit, 
since I bought the bike used. After doing some troubleshooting, though, 
I came upon a relay that attaches to one of the short harnesses which 
connects to the L and R grip leads. It appears to be dead, since 
battery voltage applied directly to the primary side does not cause 
continuity between the secondary prongs. (I double checked my test 
setup against a good relay, so I'm confident I'm doing it right.)

Question - is this relay available for ordering from Triumph separately 
(P/N on the unit is 11B0399)? Is it a standard relay that I could also 
get from Honda, etc.? And why does the grip circuit need its own relay?

Any advice would be appreciated.

Randy Busing
2000 Sprint ST
Charleston, South Carolina


     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=