[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Heated frame
- Subject: Re: [ST] Heated frame
- From: Thomas Emberson <thomas@xxxxxxxxxxxxxxxx>
- Date: Sat, 18 Sep 2004 14:53:25 -0500
Neil Lindsey wrote:
> Electrically, the solution is quite simple.
>
> All you need to do is unplug the fan, and then, using an ohmmeter, check to see if there
> is continuity between the ground wire of the fan and the fan assembly, or to the frame of
> the bike.
>
> If there is no short, then a double-pole, double-throw switch can be inserted between the
> fan plug and the fan itself. Where the switch gets physically mounted would be up to the
> individual.
Yeah, what he said, the only thing to watch for, if the fan motor is not
brushless, that is it has brushes, I would not be surprised if the
life span of the fan motor to be cut significantly. It my be hard hard
on the brushes running the motor backwards.
ymmv,
tom
- --
Thomas Emberson
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=