[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

Re: [ST] HTML test II with filtering turned on.



As one can see. The HTML text has been converted to plain text. Hope
this helps.

On Sat, 2005-04-09 at 09:18 +0100, simonb wrote:
> Make your changes in the following section, then submit them using the
> Submit Your Changes button below.
> 
>    Content filtering
> Policies concerning the
> content of list
> traffic. 
> 
> Content filtering works
> like this: when a
> message is received by
> the list and you have
> enabled content
> filtering, the
> individual attachments
> are first compared to
> the filter types. If the
> attachment type matches
> an entry in the filter
> types, it is discarded. 
> 
> Then, if there are pass
> types defined, any
> attachment type that
> does not match a pass
> type is also discarded.
> If there are no pass
> types defined, this
> check is skipped. 
> 
> After this initial
> filtering, any multipart
> attachments that are
> empty are removed. If
> the outer message is
> left empty after this
> filtering, then the
> whole message is
> discarded. Then, each
> multipart/alternative
> section will be replaced
> by just the first
> alternative that is non-
> empty after filtering. 
> 
> Finally, any text/html
> parts that are left in
> the message may be
> converted to text/plain
> if
> convert_html_to_plaintext is enabled and the site is configured to allow these conversions.
> 
> 
> 
> 
>       Description
>          Value
>    Should Mailman filter
>      the content of list
> traffic according to the
>         settings below? 
> 
> 
>    (Edit filter_content)
> No
> Yes
>           Remove message
>  attachments that have a
>  matching content type. 
> 
> 
>             (Details for
>       filter_mime_types)
> 
> 
> 
>           Remove message
>   attachments that don't
>  have a matching content
>   type. Leave this field
>       blank to skip this
>            filter test. 
> 
> 
>             (Details for
>         pass_mime_types)
> multipart/mixed
> multipart/alternative
> text/plain
> application/pgp-
> signature
> multipart/signed
> message/rfc822
>   Should Mailman convert
> text/html parts to plain
>    text? This conversion
>       happens after MIME
>    attachments have been
>               stripped. 
> 
> 
>                    (Edit
> convert_html_to_plaintext)
> No
> Yes
>    Action to take when a
>      message matches the
>        content filtering
>                  rules. 
> 
> 
>             (Details for
>           filter_action)
> Discard
> Reject
> Forward to List Owner
> Preserve
> 
> 
> 
> 
> 
> 
> 
-- 
simonb <simonb@xxxxxxxxxxx>

_______________________________________________
Triumph Sprint ST/RS mailing list
Send list posts to ST@xxxxxxxxxxxxxx
Change your list options at www.TriumphNet.com