[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Chain Life
- Subject: Re: [ST] Chain Life
- From: "Big Riff" <big_riff@xxxxxxxxxxx>
- Date: Mon, 04 Apr 2005 12:09:23 -0400
I went down 2 in the front on my '01. It's not too bad - a little buzzy on
the slab at around 80mph. I think dropping one tooth in the front - to
18/43 is the best compromise. I'm going to go to an 18 when I get the
chance, but the 17 is not horrible...
John in NJ
'01 BRG ST
>From: "Denis Liakos" <denoose@xxxxxxx>
>Reply-To: ST@xxxxxxxxxxxxxx
>To: <ST@xxxxxxxxxxxxxx>
>Subject: Re: [ST] Chain Life
>Date: Mon, 4 Apr 2005 10:36:14 -0400
>
>I'm not sure what to do about the gearing, I've been fairly content with
>the stock ratios. I know a lot of people have dropped down one tooth on
>the front, and kept the 43 T on the rear. Any suggestions would be greatly
>appreciated.
>
>Thanks
>
>Denis
>----- Original Message ----- From: "Rupert Galea" <rupert@xxxxxxxxxx>
>To: <ST@xxxxxxxxxxxxxx>
>Sent: Monday, April 04, 2005 10:25 AM
>Subject: RE: [ST] Chain Life
>
>
>>Denis,
>>When I bought my DID VM 530X it came with 120 links and I just removed
>>the extra when installing.
>>
>>Haynes says
>>Speed triple and Sprint models 108
>>Book claims to cover 97 - 2000
>>
>>Are you changing gearing?
>>Rupert
>>
>>
>>
>>
>> * * * * * * * * * * * * * * * * * *
>>*
>> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
>> http://www.TriumphNet.com/st/lilley for more info
>> http://www.TriumphNet.com/st for ST, RS and Mailing List info
>>
>>
>
>
>
> * * * * * * * * * * * * * * * * * *
> *
> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> http://www.TriumphNet.com/st/lilley for more info
> http://www.TriumphNet.com/st for ST, RS and Mailing List info
>
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=