[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

Re: [ST] Rebuilding my hulk



> Where do I get fairing fasteners?
Try a breakers yard. Maybe Triumph'ant or Lynx motorcycles in the UK or a US 
equivelant.

> I need the little plastic rivets,
Dunno what you mean here. Any pictures or examples of where they're used?

> and  I need a couple new frame brackets.
Usually the old ones can be tweaked back into place.
If the originals have snapped then a breakers would be my second choice.
Otherwise the triumph parts are available seperately and won't break the 
bank.
I doubt you'll find any from an aftermarket source.

> I'm also going to have to repair some of the holes and cracks in the 
> fairings, or take it to an expert.  Has anybody tried repairing their own 
> fairings?

Yes but welding is the only thing that seems to work on ABS in areas that 
need to flex.
Once again, sourcing used panel from a breakers may be an option.
eBay throws up surprisingly cheap ST panels every now and again.

> Do I need  any special tools?

Just a socket to fit the oil filter.
Best be aware that triumph changed the oil filter size recently so you may 
need one size socket to remove the old filter and a different one to tighten 
the new filter. Don't forget to buy a new sump plug washer.

> but the pivot point is still attached to the frame.

It's an allen head bolt that runs from the inside of the footrest hanger 
through the centre of the brake pedal.
I think it's a 6mm but It's been a while. You'll also need to disconnect the 
pedal from the master cylinder. This is held in place by a spring clip which 
just slides off and a pin that just pushes out.

Hope that helps,
Howlin' 



     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=