[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

RE: [ST] Valve Clearance Issues



My book (published in 03) gives 10nm for the cam cover to cylinder head,
10nm for camshaft bearing caps.

Valve clearance specs are listed as: in ... 0.10 mm/0.20mm
and	ex ... 0.20mm/0.30mm 

hope this helps

Ed Mallett
Tillamook, OR

-----Original Message-----
From: st-triumphnet.com-bounces@xxxxxxxxxxxxxxxxxxxx
[mailto:st-triumphnet.com-bounces@xxxxxxxxxxxxxxxxxxxx] On Behalf Of Neil
Lindsey
Sent: Sunday, July 17, 2005 5:11 PM
To: ST@xxxxxxxxxxxxxx
Subject: Re: [ST] Valve Clearance Issues

Can someone please confirm the valve clearance specs, and torque
settings for the cam cover bolts and camshaft cap bolts for the
second-generation 955 engine ('02 thru '04)?

Thanks

----- Original Message ----- 
From: "Rick & Joyce" <rnjwes@xxxxxxxxxxx>
To: <ST@xxxxxxxxxxxxxx>
Sent: Saturday, July 16, 2005 10:35 AM
Subject: RE: [ST] Valve Clearance Issues


> WHOA THERE!!!
>
> My manual says 10nm for the cam cover bolts and the camshaft caps.
> For some reason I seem to recall there were some typos in the early
> manuals.
>
> --
> Rick in Oregon
> '01 Sprint ST
>
>
> John wrote:
> > Do you mean the cam cover to cylinder head bolts?
> Long are 25NM
> Short are 15NM
>
>
>
> _______________________________________________
> Triumph Sprint ST/RS mailing list
> Send list posts to ST@xxxxxxxxxxxxxx
> Change your list options at www.Triumphnet.com
>



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.9.0/50 - Release Date: 7/16/05

_______________________________________________
Triumph Sprint ST/RS mailing list
Send list posts to ST@xxxxxxxxxxxxxx
Change your list options at www.Triumphnet.com


_______________________________________________
Triumph Sprint ST/RS mailing list
Send list posts to ST@xxxxxxxxxxxxxx
Change your list options at www.Triumphnet.com