[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

Re: [ST] Handlebar adjustment



Unless I'm corrected, it sounds like  avery simple job.  I just wanted to
make sure there were no odd tools involved.  Thanks, Rick.

David

On 4/5/07, halfast3 <halfast3@xxxxxxxxxxx> wrote:
>
> David asked:
> >How difficult is it to adjust the triple tree?<
>
> With the weight OFF the front wheel, loosen the front axle and the
> pinch bolts on the upper and lower triple clamps.  You should then be
> able to tweak things back into alignment by pushing the front wheel
> against the steering stop in the necessary direction.  When done,
> torques [this is off the top of my head, so someone back me up on
> this] are: Ft axle-60nm; ft axle pinch bolts-20nm; lower triple
> clamp-35nm; upper triple clamp-20nm.
> Good luck,
> --
> Rick in Oregon
> '01 Sprint ST < rip :o|
> Tiger 1050 ABS on order :o)
>
> _______________________________________________
> Triumph Sprint ST/RS mailing list
> Send list posts to ST@xxxxxxxxxxxxxx
> Change your list options at www.Triumphnet.com
>
_______________________________________________
Triumph Sprint ST/RS mailing list
Send list posts to ST@xxxxxxxxxxxxxx
Change your list options at www.Triumphnet.com