Re: [ST] Alarm

["Chris Harwood" <Chris@xxxxxxxxxxxxxxxxxx>]

Mark

Glad you got it going.

If you're handy with a small soldering iron, those hand-held units
often get hairline breaks in the tracks especially round the switches
due to the user squeezing them.  Pull it open and look at it under a
bench magnifier - or you can probably buy a replacement from datatool if
that scares you.

If it helps, my Datatool System Evo was fitted by the Triumph dealer on
a second-hand bike but has the Triumph logo on the remote which is
egg-shaped and the top 3/4 is clear plastic with one round and one oval
button.  The earlier model was the Datatool System3 IIRC.

Cheers
Chris Harwood
00 RS

>>> gbdiver@xxxxxxxxx 17/06/2007 19:10:17 >>>
Thanks Chris,

I did try close proximity but still nothing :( You are right, I
couldn't 
start the bike last night and had to get a lift home and then another
lift 
to the bike this AM. Managed to get the bike started with the spare
unit. 
Checked the batteries, by swapping them around and it seems it is the
remote 
unit not the battery. That makes me nervous being down to just one
remote.

Mine is a 99 ST with the factory alarm.

I am thinking of putting in a secondary switch if I can find the main
feed.

Mark


----- Original Message ----- 
From: "Chris Harwood" <Chris@xxxxxxxxxxxxxxxxxx>
To: <ST@xxxxxxxxxxxxxx>
Sent: Sunday, June 17, 2007 4:53 AM
Subject: Re: [ST] Alarm


> Mark
>
> Do you have more info - it should not be possible to start the bike
> with the alarm enabled as a 'proper' install immobilises the engine -
or
> was that your problem?
>
> What year ST?
>
> The Datatool alarms (factory job) link into the loom under the rear
of
> the seat on my 00 RS.  A shorting plug was removed (and should have
been
> retained) in order to install it.
>
> Otherwise its down to batteries in the remote unit.  I assume you
tried
> close proximity?  The unit on mine is behind the RHS seat surround.
>
> HTH
>
> Chris Harwood
> 00 RS
>
>>>> gbdiver@xxxxxxxxx 17/06/2007 06:43:45 >>>
> Does anyone know how to disable the alarm on an ST?
>
> Seems I was unable to turn it off tonight to ride home. That was a
> small
> problem :(
>
> Mark
>
> _______________________________________________
> Triumph Sprint ST/RS mailing list
> Send list posts to ST@xxxxxxxxxxxxxx 
> Change your list options at www.Triumphnet.com 
> _______________________________________________
> Triumph Sprint ST/RS mailing list
> Send list posts to ST@xxxxxxxxxxxxxx 
> Change your list options at www.Triumphnet.com 

_______________________________________________
Triumph Sprint ST/RS mailing list
Send list posts to ST@xxxxxxxxxxxxxx 
Change your list options at www.Triumphnet.com
_______________________________________________
Triumph Sprint ST/RS mailing list
Send list posts to ST@xxxxxxxxxxxxxx
Change your list options at www.Triumphnet.com