[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

Re: [St] Headlamp low beam question



My 01 uses both headlights all the time. Both low, both high (when switched).
Interestingly enough, 2 months ago I lost one of the low beams. Being cheap I kept riding around on one low beam. The high still worked.
Riding around one day down a rough road, took a hard jolt, looked at the dash and the high beams were on. Cut the switch to low beams, but it already was! I had lost "the other" low beam and high beams were all that was left. Seems the bike "knows" and defaulted to the highs.
I replaced them both ( H4 ) and they work correctly again.
I'm in US but I've read that the european models are one low, both high. There is a relay someplace under there that can be changed to the US version.
Or one of your low's is out.


--- On Thu, 9/18/08, Jered Floyd <jered@xxxxxxxxxxxxx> wrote:

> From: Jered Floyd <jered@xxxxxxxxxxxxx>
> Subject: [St] Headlamp low beam question
> To: ST@xxxxxxxxxxxxxx
> Date: Thursday, September 18, 2008, 7:57 PM
> Here's an embarrassingly simple question, but I
> can't seem to find the  
> answer.
> 
> I have an '01 ST.  With the low beams, only one
> headlamp is  
> illuminated; with the high beams, both are.  Is this
> normal?  (I've  
> seen both one- and two-headlamp low beam behaviour on
> different bikes.)
> 
> Thanks,
> --Jered
> _______________________________________________
> Triumph Sprint ST/RS mailing list
> Send list posts to ST@xxxxxxxxxxxxxx
> Change your list options at www.Triumphnet.com


      
_______________________________________________
Triumph Sprint ST/RS mailing list
Send list posts to ST@xxxxxxxxxxxxxx
Change your list options at www.Triumphnet.com