[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: Banjo bolt thread pitch
- Subject: Re: Banjo bolt thread pitch
- From: "Stephen E. Hale" <seh750@xxxxxxxxxxxxx>
- Date: Tue, 24 Aug 1999 18:02:18 -0700
>Date: Tue, 24 Aug 1999 07:45:50 -0400
>From: "Danilowicz, Paul S." <danilps@xxxxxxxx>
>Subject: RE: Banjo bolt thread pitch
>
>You can get a handy thread pitch guage at most any hardware or tool store.
I use mine more often than you would expect. Probably less than $5 US.
>> Paul
>> Externals & Controls Module Center;
>> Fuel Systems Business Center, Value Engineering
>> Phone (860) 565-7575 FAX: (860) 565-2914
>> E-Mail: danilps@xxxxxxxx
>> Location: OBF-4 , Row 7-S
I got impatient and tore my Sprint apart to figure it out...the issue
wasn't the measurement but rather not wanting to bleed the brakes and take
the bolts out. But I hadn't thought about a thread pitch gauge, I'll have
to get one of those. Thanks for the suggestion!
In case anyone cares, the banjo bolts on a Sprint ST are 10mm*1.25 and the
bleeders on the calipers are 8mm*1.25. I'll let you all know the results
of my brake mods once complete.
- -Stephen
seh750@xxxxxxxxxxxxx
http://www.netcom.com/~seh750/home.htm
* * * * * * * * * * * * * * * * * * *
The ST Mailing list is sponsored by the Unofficial ST Website
http://www.TriumphNet.com/st for ST and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=