[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: Rear brake sender unit
- Subject: Re: Rear brake sender unit
- From: Eric Sheley <eric@xxxxxxxxxx>
- Date: Wed, 24 Mar 1999 00:21:03 -0500
Do you have rear brake pressure (are the brakes grabbing)? Maybe you have a
leak.
Maybe someone with a service manual (hello David B) could look and see if
they mention how to test / adjust the pressure switch or if it is just a
fail and replace part.
Keep us informed
- - Eric
>At 10:53 PM 03/23/1999 -0600, Rich wrote:
>Well, I just found the first problem on my new ST: I have no rear brake
>light. While the front brake turns on the light with a micro-switch,
>the rear uses a pressure switch which senses line pressure. Tested it
>tonight while going over the bike, and no rear brake light. I removed
>the connector and shorted the leads with the ignition on and I get
>brake lights, but nothing when the pedal is depressed. Has this sucker
>got an adjustment, or is it a pitch and replace deal?
* * * * * * * * * * * * * * * * * * *
The ST Mailing list is sponsored by the Unofficial ST Website
http://www.TriumphNet.com/st for ST and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=