[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: New file uploaded
- Subject: Re: New file uploaded
- From: Eric Sheley <eric@xxxxxxxxxx>
- Date: Mon, 17 May 1999 13:33:52 -0400
Thanks John,
Procedure was as follows:
- - Removed lever
- - Used Dremel with medium grit grinding wheel to remove all casting marks
and seams.
- - Used Dremel with fine sanding wheel to remove any scoring marks from the
grinding wheel.
- - Sand lightly with 600 grit paper
- - Run on 8'" sewn cloth polishing wheel using white rouge. Repeat
application until mirror surface obtained and all sanding marks erased.
- - Polish with aluminum polish (will have to look up the name tonight)
- - Re install
- - Remove layer of polishing compound from all exposed areas of skin.... ;-)
- - Eric
John wrote:
>Eric: Wow! Nice polishing job. What tools did you use? What type of
>polishing compound? Did you spray or wipe something on afterwards to keep
>that polished look?
>>URL :- http://www.triumphnet.com/st/upload/polish.JPG
>>File size = 164795
* * * * * * * * * * * * * * * * * * *
The ST Mailing list is sponsored by the Unofficial ST Website
http://www.TriumphNet.com/st for ST and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=