[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: SUVs & Goop
- Subject: Re: SUVs & Goop
- From: Erik Miner <axeis@xxxxxxxxxxxxxx>
- Date: Tue, 4 Apr 2000 17:29:12 -0400
Had the same problem. I found at the local auto parts store a double
sided tape that is used for attaching auto moldings. Covered the back
of the tank pad and it is on, I mean ON. I made sure to ring the
circumference of the pad and then as much of the other area as
possible. It can come off but not easy. The trick is to THROUGHLY
clean the tank and the pad with alcohol. Then put the tape on the
tank pad and let sit over night. Then apply when the temp is over 60.
Let it sit for a couple of hours and you are good to go.
Erik
Hot Dawg
>
>I was thinking of using Goop to reattach my carbon fiber tank pad, as
>the little black adhesive strips failed due to cold weather. What do you folk
>think of that idea? Also, there are different varieties of Goop. I selected
>Marine Goop, as I thought it would be easier to remove any spill-over.
>Please advise. Thanks.
>
>-- Shon
>"Guard Dawg"
>99 Red ST
>
>
> * * * * * * * * * * * * * * * * * * *
> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> http://www.TriumphNet.com/st/lilley for more info
> http://www.TriumphNet.com/st for ST, RS and Mailing List info
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=