[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: Torx FAQ
- Subject: Re: Torx FAQ
- From: David Ben-Jamin <dbenj@xxxxxxxx>
- Date: Sun, 20 Feb 2000 13:23:24 -0800
thanks Eric. I found out the caliper torx size just fine...finding the
actual tool at a store was another matter. Biggest one Sears carries is T50.
At 03:27 PM 2/20/00 -0500, you wrote:
>At the suggestion of Greg and others, I added the following list of socket
>sizes to the FAQ section under "Special Sockets / Torx / Tools"
>
>The following is the list that I added - if anyone had additional
>suggestions, let me know
>
>- Fuel Tank removal - Torx T30 and 4mm Allen
>- Fairing Removal - 5mm and 6mm Allen
>- Front Tire - 15/16 inch socket (or 23mm)
>- Front Caliper mounting bolts - Torx T55
>- Rear Wheel - 1 13/16 inch socket (or 46mm)
>- Oil Drain Plug - Torx T50
>Torx T50 and T55 used for many engine, frame and suspension mounts
>
>- Eric
>
>
> * * * * * * * * * * * * * * * * * *
*
> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> http://www.TriumphNet.com/st/lilley for more info
> http://www.TriumphNet.com/st for ST, RS and Mailing List info
>
_________________________________
David Ben-Jamin
mailto:dbenj@xxxxxxxx
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=