[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

Re: Scottoiler mounting location?



In a message dated 1/2/00 2:54:54 PM, sobiloff@xxxxxxxxxxxxxx writes:

<< Hi all,
    I just got done mounting the RMV for the standard Scottoiler and was
wondering where other folks decided to mount theirs.  >>

Rocket Motorcycles in San Diego installed mine, and put it just to the left 
of the licence plate, securing it with 2 zip-ties. Two holes had to be bored 
in the plastic rear fender beside the licence plate for the zip-ties. The 
filler opening on the resevoir faces outwards (to the left) making it 
possible to fill the resevoir and adjust the flow without removing anything, 
not even the pannier. The oil line curls up under the rear fender, then 
forward and down to the chain-guard to which it is secured with more zip 
ties, to position the outlet over the left side of the chain just in front of 
the rear sprocket, and the vacuum line goes under the seat and tank to the 
vacuum T connection under the front of the tank. The resevoir is visible from 
the back, but looks quite sanitary and even trick, and the lines are covered 
up. It works fine. Dave Collins, San Diego

 *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
 The ST/RS Mailing list is sponsored by the Unofficial ST Website
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=