Re: fire in the belly

[Eric Sheley <eric@xxxxxxxxxx>]

At 02:41 AM 7/31/00 -0400, TrmpetDave@xxxxxxx wrote:
>When the factory sends you the replacement belly pan, they will ask your
>dealer to install it after bending the attachment brackets so as to increase
>the clearance between pan and exhaust pipe. I happen to have some foil-backed
>asbestos that I am going to insert between the two as well, in addition to
>the insulation that comes on the pan. Would't want to risk burning the
>(expensive) CF pan. Dave Collins, San Diego

Just be sure that when installed this insulation does not block the flow of 
air. You should maintain 10-15 mm of clearance between the pipe and any 
insulation.

- - Eric


     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=