[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: Swung the pipe back up
- Subject: Re: Swung the pipe back up
- From: Keith Peters <keith_peters@xxxxxxxxxx>
- Date: Wed, 14 Jun 2000 17:09:39 +0100
Jack at 16:52 14/06/2000 , you wrote:
> First remove the rear allen bolt. Then remove the two small bolts at
>the front pipe bracket. There's enough room between the rear fairing and
>frame to insert an open end wrench and use a socket to remove the nut.
>Push the bolt most of the way out with a screwdriver. Drop the bracket
>while rotating with the bolt in. Reinstall old bolt. Remove lower pipe
>bracket bolt. Remove upper pipe bracket bolt. Set bracket aside. Loosen
>pipe front clamp and swing pipe up. Tighten the two pipe bolts.
Reinstall old bolt ????
Keith W Peters
Wrexham. UK
"Cymraeg Dawg & LongTail (00 Blue ST)"
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=