[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Installing a master link with clip
- Subject: Re: [ST] Installing a master link with clip
- From: Erik Miner <Axeis@xxxxxxxxxxxxxx>
- Date: Tue, 10 Apr 2001 08:12:59 -0400
Jay if you are installing a chain with a rivet type master link do
yourself a favor and have it done correctly with the proper tool. I
can't think of many other things that would be worse to come off at
speed!!
Erik
>Jay-I just installed a 520 on one of my other bikes and I used Channel
>Locks. The advantage over pliers or vise-grips is they can be adjusted
>so that both surfaces are parallel, which is critical for pressing the
>side plate on straight.
>
>David
>'99 ST
>
>
> * * * * * * * * * * * * * * * * * * *
> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> http://www.TriumphNet.com/st/lilley for more info
> http://www.TriumphNet.com/st for ST, RS and Mailing List info
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=