[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

Re: [ST] what's this fastener?



I don't have my manual here (at work) but it is called a frame adjuster.

Not sure exactly who it works.

Mark


brd wrote:
> 
> Hey all.  I put my framesliders from lilley's on this weekend.  On the
> right side, there was a washer that threads onto the housing around the
> hole the torx-head bolt goes through.  This washer has 4 slots in it.
> There's a pic here:
> 
> http://www.erf.net/~brd/triumph/framesliders/
> 
> What is this for, and should it be left in place when replacing the
> torx-head bolt with the bolt that's part of the slider?  I left it in
> place, as it didn't seem to interfere with anything, as you can see in
> another picture on that page.
> 
> Anyway, the sliders were easy to put on, and I did the left side without
> removing the side fairing.  They are also hardly noticeable on my bike,
> since it's black.
> 
> Laters,
> Brian
> --
> '99 ST (black)
> Dallas, TX
> 
>      *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
>       The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
>           http://www.TriumphNet.com/st/lilley for more info
>    http://www.TriumphNet.com/st for ST, RS and Mailing List info

     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=