[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: weird thing happened
>>what pin are you guys talking about? i thought i knew, but
>>after looking at the lower end of my clutch cable this weekend,
>>i'm confused.
>>from memory, there's a little u-shaped thing on the end of the
>>cable, with a pin through the arms of the U, going through the
>>lever that operates the clutch. is the little pin the thing you're
>> talking about? if so, where are you putting the cotter pin?
>>the pin on my RS is _just_ long enough to be peened on the
>> end to hold it into the hole in the U-shaped part.
Paul,
That is the correct bit, the pin that joints the u-shaped thing to the
clutch lifter arm on the motor.
On my bike (after it broke & I pressed it all back together), there was no
room for a cotter pin, in fact the pin did not stick out of the u-shaped
bit at all. Therefore there was no room for it to be peened over at all &
it only relied on being an interference fit in the hole.
Darren Mason.
2000 ST.
Melbourne, AuSTralia.
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=