[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: Torque
- Subject: Re: Torque
- From: "Neil Lindsey" <neil@xxxxxxxxxxx>
- Date: Thu, 18 Jan 2001 11:06:34 -0800
- ----- Original Message -----
From: "Rick Damiani" <triumph@xxxxxxxxx>
> On Mon, 15 Jan 2001 07:44:51 -0800, "Nick Tarabochia"
> <tara@xxxxxxxxxxxxx> wrote:
>
> >What are the maximum and minimum torque values for a Sprint ST (ft lbs or
> >NM) and can that be accomplished with one torque wrench?
>
> The max is (IIRC) 108 ft-lbs on the rear wheel, while the minimum is
> ~4 or 5 NM (bodywork and such). You wouldn't be able to get them all
> with the same torque wrench unless the wrench has a logarithmic scale
> and can drive 1/4", 1/2", and 3/4" drive sockets.
>
>
This brings up a question:
Does a socket adapter throw off the calibration of a torque wrench?
Neil
> * * * * * * * * * * * * * * * * * *
*
> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> http://www.TriumphNet.com/st/lilley for more info
> http://www.TriumphNet.com/st for ST, RS and Mailing List info
>
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=