Re: [ST] for Keith - GenMars

["Keith Winter" <kwinter@xxxxxxxxxxxxx>]

Don, Paul, and everyone else who gave feedback,

Thanks for the inputs.  I also talked with GenMar, and they said that the 
bars, controls, etc. do not hit the fairing with standard RS bars, although I 
might have to rotate the brake reservoir slightly.

So, I'm going to order them and see how it goes.

Thanks again.

PS to Don: are you going to ride the RS or the Bonnie to the western 
rallye?

- -Keith
'00 RS

On 13 Mar 2001, at 10:03, don draper wrote:

> 
>  >>> Would the bend be required when using the GenMar risers and the
> standard RS bars? <<<
> 
>     Hmmm,... I tried that set-up briefly; the St bars were my first
> mod, then tried the GenMars w/ the RS bars and finally put the ST
> bars over the GenMars, which solved my problem (which was that the
> large hump on the back of the tank was trying to occupy the same
> space as the large hump on the front of the rider).  I've been trying
> to remember if the RS bars hit the firing at full lock, but....... I
> CAN say that higher bars come further back due to the fork angle.
> 
>     Funny,... I don't remember being so forgetful!
> 
>                                    Have fun;
>                                               doggydo   - - - o%\o


     *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
      The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
          http://www.TriumphNet.com/st/lilley for more info
   http://www.TriumphNet.com/st for ST, RS and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=